"Balloon Grade" Helium represents a slightly impure Helium.
While there is no scientific definition of this quality, it is often accepted that the purity of "Balloon Grade" Helium is around 99%.
Under these circumstances, the low-pressure metal storage in the High Pressure Recovery Systems can be replaced by a gas-bag of different dimensions.
By using such a method, the CAPEX can be reduced by not using a low-pressure compressor and metal storage.
However, the Helium quality in the system will degrade progressively, so a careful techno-economical study must be performed.
Quantum experts can assist in the optimization of the system.
The more commonly employed components and specifications of a high pressure balloon grade helium recovery system are:
-
High Pressure Compressor - Q09.4-HRP series
- reciprocating (piston) type
- multi-stage
- inlet atmosphericâ¨outlet pressure to 330 bar (5000 psi)
- flow rates from 8 Nm3/hr to 44 Nm3/hr (5 scfm to 26 scfm)
- electric motor drive (gas or diesel motor drive available on special order)
-
Gas Recovery Bag - Q09.4-BAG-[material]-[size] (E.g.: Q09.4-BAG-S1-11M)
- low permeability modified urethane elastomer
- standard volumes from 3 m3 (100 ft3)
- nominal shape is approximately semi-cylindrical, but may be manufactured to fit your space
-
necessary accessories:
- Gas bag inflation sensor to activate compressor - Q09.4-CONTROL
- Pressure relief valve - Q09.4-PR
- Isolation valve - Q09.4-BV
-
High pressure distribution and storage
- Standard high pressure gas cylinders, usually supplied by customer or bulk gas supplier
- Manifold (Q09.4-HP-MAN) equipped with shut-off valves, bleeder valves, and pressure gauges as necessary
-
Optional:
- Helium Gas Purity Meter to monitor gas contamination - Q11.4-TC-2